See if KB article Q172216 at
http://support.microsoft.com/support/kb/articles/Q172/2/16.ASP helps with
your needs.
Piatnitchi Cristian wrote in message ...
>Hi all
>
>I am trying to setup an Cisco 1600 dial-up into a remote WinNT 4 RAS
server.
>No results , mainly because the NT server tryes to get authenticate in the
>router
>too (I don't know how to set a secret password on the NT box, the debugging
>shows me just that it
>tryes to use its own host name for challenge ).
>The debugging shows me that it tries to use ms-chap.
>The pap authentication work with dial-up and a remote CISCO router but not
>with an NT box
>I enabled "any authentication including clear text" on the NT but no
>results. It continuues to
>try ms-chap.
>
>Did anybody try this combination (dila-out from a C1600 into a NT box using
>ms-pap or chap )?
>Could you tell me how to stop the NT to try beeing authenticate into the
>Cisco router ?
>
>See below the debugging
>
>44550: 2d04h: Se0 PPP: Treating connection as a callout
>44551: 2d04h: Se0 PPP: Phase is ESTABLISHING, Active Open
>44552: 2d04h: Se0 LCP: O CONFREQ [Closed] id 176 len 25
>44553: 2d04h: Se0 LCP: ACCM 0x000A0000 (0x0206000A0000)
>44554: 2d04h: Se0 LCP: AuthProto MS-CHAP (0x0305C22380)
>44555: 2d04h: Se0 LCP: MagicNumber 0x1BD1406C (0x05061BD1406C)
>44556: 2d04h: Se0 LCP: PFC (0x0702)
>44557: 2d04h: Se0 LCP: ACFC (0x0802)
>44558: 2d04h: Se0 PPP: I pkt type 0xC021, datagramsize 29
>44559: 2d04h: Se0 PPP: I pkt type 0xC021, datagramsize 29
>44560: 2d04h: Se0 LCP: I CONFREQ [REQsent] id 0 len 25
>44561: 2d04h: Se0 LCP: ACCM 0x00000000 (0x020600000000)
>44562: 2d04h: Se0 LCP: AuthProto MS-CHAP (0x0305C22380)
>44563: 2d04h: Se0 PPP: I pkt type 0xC021, datagramsize 29
>44564: 2d04h: Se0 PPP: I pkt type 0xC021, datagramsize 29
>44565: 2d04h: Se0 LCP: MagicNumber 0x00002839 (0x050600002839)
>44566: 2d04h: Se0 LCP: PFC (0x0702)
>44567: 2d04h: Se0 LCP: ACFC (0x0802)
>44568: 2d04h: Se0 LCP: O CONFACK [REQsent] id 0 len 25
>44569: 2d04h: Se0 LCP: ACCM 0x00000000 (0x020600000000)
>44570: 2d04h: Se0 LCP: AuthProto MS-CHAP (0x0305C22380)
>44571: 2d04h: Se0 LCP: MagicNumber 0x00002839 (0x050600002839)
>44572: 2d04h: Se0 LCP: PFC (0x0702)
>44573: 2d04h: Se0 LCP: ACFC (0x0802)
>44574: 2d04h: Se0 LCP: I CONFACK [ACKsent] id 176 len 25
>44578: 2d04h: Se0 LCP: PFC (0x0702)
>44579: 2d04h: Se0 LCP: ACFC (0x0802)
>44580: 2d04h: Se0 LCP: State is Open
>44581: 2d04h: Se0 PPP: Phase is AUTHENTICATING, by both
>
>44584: 2d04h: Se0 CHAP: O CHALLENGE id 139 len 21 from "ciscouser"
>44585: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 28
>44586: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 28
>44587: 2d04h: Se0 CHAP: I CHALLENGE id 84 len 26 from "NTbox "
>44588: 2d04h: Se0 CHAP: Using alternate hostname rras
>44589: 2d04h: Se0 CHAP: O RESPONSE id 84 len 58 from "ciscouser"
>44590: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 16
>44591: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 16
>44592: 2d04h: Se0 CHAP: I FAILURE id 84 len 14 msg is "E=691 R=1 "
>44593: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 16
>44594: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 16
>44595: 2d04h: Se0 CHAP: I FAILURE id 84 len 14 msg is "E=691 R=1 "
>44596: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 16
>44597: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 16
>44598: 2d04h: Se0 CHAP: I FAILURE id 84 len 14 msg is "E=691 R=1 "
>44599: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 16
>44600: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 16
>44601: 2d04h: Se0 CHAP: I FAILURE id 84 len 14 msg is "E=691 R=1 "
>44602: 2d04h: Se0 CHAP: Using alternate hostname rras
>44603: 2d04h: Se0 CHAP: Using alternate hostname rras
>44604: 2d04h: Se0 CHAP: O CHALLENGE id 140 len 21 from "rras "
>44605: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 16
>44606: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 16
>44607: 2d04h: Se0 CHAP: I FAILURE id 84 len 14 msg is "E=691 R=1 "
>44608: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 16
>44609: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 16
>44610: 2d04h: Se0 CHAP: I FAILURE id 84 len 14 msg is "E=691 R=1 "
>44611: 2d04h: Se0 PPP: I pkt type 0xC223, datagramsize 16
>
>
>Thanks for help
>Cristian Piatnitchi
>
>_________________________________
>FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
