Hi,
Where is your point of failure. I would be inclined to spread the load across all the
5300's. Given you will then have a fair amount of redundant space should a 5300 fail
there should not be much difficulty getting onto another. The clue is to spec up the
primary rates to get the maximum benefit.
Just a thought
Teunis
Hobart, Tasmania
Australia
On Saturday, February 24, 2001 at 05:09:38 PM, jono max wrote:
> Hi
>
> I have to provide a solution for 300+ ISDN dial in clients. Can this be
> achieved with a couple of AS5300's each with an 8port PRI card ? Basically
> looking to combine two AS5300 's for the "hub" site...then come up with a
> resilient solution. Can you have two further AS5300's for back up within a
> Multichassis Multilink PPP "group". Any comments would be appreciated.
>
> Thanks
> JM
>
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]