On the AGS, unlike the 2500's and above, the DTE, DCE setting is actually a
jumper on the serial card. You will have to go in and remove the card and
set/verify the jumpers.
This link will provide you the correct jumper settings. More than likely it
is set for DCE, the default
http://www.cisco.com/univercd/cc/td/doc/product/core/cisagspl/agscfig/34084.
htm#xtocid2857013
Let me know if you have any other questions. I have two AGS running in my
lab. One for a frame-switch. The other is pretending to be a 2502 until I
can purchase one.
Regards,
Drew
-----Original Message-----
From: Daniel Cotts [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 27, 2001 8:04 AM
To: 'ciscojolof'; [EMAIL PROTECTED]
Subject: RE: back-to-back cable AGS+ and 2523
Do a "show controllers s 4" on the 2523 to verify that the router sees a DCE
cable.
I have no experience with the AGS+. However, some serial ports are sync
while others are async. Which ones do you have?
> -----Original Message-----
> From: ciscojolof [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, February 27, 2001 8:59 AM
> To: [EMAIL PROTECTED]
> Subject: back-to-back cable AGS+ and 2523
>
>
> HI guys,
>
> I have a problem having my AGS+ (DB26 DTE) talk to my 2523 (DB60 DCE).
> I purchased a custome cable and tried to have it work in vain.
>
> THe configs are as follow
>
>
> Router_2523 is DCE (provides clocking at 56000)
>
>
>
>
>
>
> Router_AGS+#sh int s3
> Serial3 is up, line protocol is down
> Hardware is MCI Serial
> Internet address is 172.17.10.4 255.255.255.0
> MTU 1500 bytes, BW 56 Kbit, DLY 20000 usec, rely 255/255, load 1/255
> Encapsulation HDLC, loopback not set, keepalive set (10 sec)
> Last input never, output 0:00:20, output hang never
> Last clearing of "show interface" counters never
> Input queue: 0/75/0 (size/max/drops); Total output drops: 0
> Output queue: 0/64/0 (size/threshold/drops)
> Conversations 0/1 (active/max active)
> Reserved Conversations 0/0 (allocated/max allocated)
> 5 minute input rate 0 bits/sec, 0 packets/sec
> 5 minute output rate 0 bits/sec, 0 packets/sec
> 0 packets input, 0 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants
> 1 input errors, 0 CRC, 1 frame, 0 overrun, 0 ignored, 0 abort
> 1258 packets output, 28716 bytes, 0 underruns
> 0 output errors, 0 collisions, 429 interface resets, 0 restarts
> 0 output buffer failures, 0 output buffers swapped out
> 841 carrier transitions
> Router_AGS+#
>
> Router_2523#sh int s4
> Serial4 is up, line protocol is down
> Hardware is CD2430 in sync mode
> Internet address is 172.17.10.2/24
> MTU 1500 bytes, BW 115 Kbit, DLY 20000 usec, rely 255/255,
> load 88/255
> Encapsulation HDLC, loopback not set, keepalive set (10 sec)
> Last input 00:00:00, output 00:00:00, output hang never
> Last clearing of "show interface" counters never
> Input queue: 1/75/0 (size/max/drops); Total output drops: 0
> Queueing strategy: weighted fair
> Output queue: 0/1000/64/0 (size/max total/threshold/drops)
> Conversations 0/2/256 (active/max active/max total)
> Reserved Conversations 0/0 (allocated/max allocated)
> 5 minute input rate 40000 bits/sec, 200 packets/sec
> 5 minute output rate 40000 bits/sec, 200 packets/sec
> 1093746 packets input, 24255326 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> 119 input errors, 119 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> 1094957 packets output, 24283752 bytes, 0 underruns
> 65 output errors, 0 collisions, 443 interface resets
> 0 output buffer failures, 0 output buffers swapped out
> 776 carrier transitions
> DCD=up DSR=up DTR=up RTS=up CTS=up
>
>
>
> Router_2523#
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
