I believe you answered your own question.
-----Original Message-----
From: Andy [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 27, 2001 7:20 AM
To: Donohue, Steve
Cc: cisco@groupstudy. com (E-mail)
Subject: Re: DS3 -- no channelized
On Tue, 27 Feb 2001, Donohue, Steve wrote:
> Good Afternoon Group,
>
> I was wondering if someone could give me a hand.
>
> I am trying to a configure T3 controller on a 7507 using the no
channelized
> command. The router will not accept it. I am running IOS 12.0(5)T1. I
> want to open the pipe to full bandwidth without configuring the T1
> interfaces.
I may be way off here, but there are two types of PA's, channelized and
clear-channel. If you have channelized, then I don't think you can make it
clear channel, ie, get 45 meg out of it (assuming thats what you are
trying to do).
andy
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
