can you reverse-telnet from console ?
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
vikas patel
Sent: Wednesday, February 28, 2001 8:26 PM
To: [EMAIL PROTECTED]
Subject: Reverse telnet Problem
Hello Group,
I have cisco 2511 router connected with Zyxel modem rack with 16 analog 33.6
Kbps modems. I want to reverse telnet into all of these modems without using
the console port and hyper terminal for changes to be done in all of these
modems by telneting into ethernet port of the router.
The process i do is:
1). I telnet into ethernet port IP
2). then i give the command
Router>telnet (ip of ethernet) 2001
Here 2000+n, where n=1, is the first modem out of my 16 modem.
this shows the following message
Trying ...
% Connection refused by remote host
3). I checked that their is no user connected on this modem.
4). I also checked that the line is configured for modem inout
5). The show line 1 showed the following values:-
Modem state: Idle
Modem Hardware state: CTS noDSR DTR RTS
What is wrong here, i think this is perfect way to communicate with the
modem thru routers. One more thing that i would tell you is that the
modems(16) are allready configured.
So friends, i need your help in configuring my modems using router.
Waiting for ur replies
Kind regards
vikas
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]