You're the man! Thanks Damian. This really helps. Mixa "Rizzo Damian" <[EMAIL PROTECTED]> wrote in message 49C181ACF35ED311A7DC00508B5AF61102E52458@NAEXCHANGE">news:49C181ACF35ED311A7DC00508B5AF61102E52458@NAEXCHANGE... > It's relatively easy. For example if you wanted to simulate a Frame Relay > connection between the two routers via a DCE/DTE cable, you would configure > your routers as stated below; > > > Router 1 (the DCE end, provides clock at 64Kb, "clockrate 64000") > > -------- > > > interface Serial1 > > no ip address > > encapsulation frame-relay > > clockrate 64000 > > no keepalive > > interface Serial1.1 point-to-point > > ip address 131.108.177.164 255.255.255.0 > > frame-relay interface-dlci 26 broadcast > > > > Router 2 > > -------- > > > interface Serial0 > > no ip address > > encapsulation frame-relay > > no keepalive > > frame-relay intf-type dce > > interface Serial0.1 point-to-point > > ip address 131.108.177.166 255.255.255.0 > > frame-relay interface-dlci 26 broadcast > > > > -Thats it. Hope this helps. > > > Damian Rizzo > CCNA+ Security, CNE, MCP > > > > -----Original Message----- > From: Mixa [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, February 28, 2001 1:24 PM > To: [EMAIL PROTECTED] > Subject: Help! > > > Hello, > > I'm new to Cisco and just bought 2 2500Series routers to practice my CCNA. > Could you please show me how to make 2 routers talk via a back to back > cable? > > Thanks in advance! > > Mixa > > PS: I know I need to configure a DTE/DCE but I can't find where. > > > > > > > > _________________________________ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _________________________________ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]