Try to disable flow control in your terminal software...
----- Original Message -----
From: nandit <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Wednesday, February 28, 2001 02:57
Subject: re router bootup
> Hi group,
> my cisco 2600 and 2500 routers show the booting when i am connected to
> console but when the press return to get started comes on my console
ceases
> to function.I telnetted and checked config register as 0x2102
> I changed the config register to 0x2142 on one of my routers and now i get
> only the setup mode prompt and the console hangs after that> How can i
> resolve this
> Thanks
> Nandit
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
