< I am still sending this message as it may help someone else sometime > Hello, I am having trouble copying the IOS from my 2501 to my TFTP server (Cisco's NT server). The TFTP server is up and working, I can copy configs in both directions. When I try to copy the flash from the 2501 to the tftp server, I enter in the source file name, and then either accept the same name on the TFTP server or change it (changed in the following example). I should be able to copy from the flash no matter what, right? <--- Opps ---> Just found my own answer, I think. I just copied the file name from a show ver (should work from anywhere the file name is displayed), into the clipboard and then 'pasted to host' from hyperterminal. Worked just fine. I wonder what I was mistyping. Oh just found it, I was typing a one instead of an 'L' here igs-ir-l When I pasted the commands into my email client i could see the difference between the L and one, in Hyperterminal I couldn't tell the difference (I just checked again, whatever font is used in Hyperterminal the little 'L' and the 'one' are exactly the same, D*MN them) Oh well Moral of the story, Watch your typing, your fonts, and copy filenames if needed. Matt Wehland _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]