Since your current connection is a T1 you have a
serial port (with or without integrated DSU) with the
max speed of 2mbps. This will not be sufficient for
the T3 (and the connector is different) If you have a
7500 series router you can get an internal T3 mod.
with an integrated DSU. Anything less you'll need to
pick up an HSSI mod. plus an external DSU/CSU.
Configuration is failry straight forward and you can
find it on CCO.
Moe.
p.s. I think the lowest router that supports the HSSI
is a 3600 series.
--- Jatin <[EMAIL PROTECTED]> wrote:
> HI ,
> Can any one help me in knowing what changes will be
> involved ine terms of
> hardware , software and configuration changes when
> up grading the serial
> link from T1 to T3
>
> Thanks
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
=====
_____________________________________________
Moe Tavakoli
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
