I am going to connect a cable from the telco's chrono directly to the PRI
module on the 3640. I need the pinouts for the cable from the chrono to the
port.I am using cat5 cable.
This is what I have found but I am unsure whether it is correct to use as I
don't want to blow the module port.
Pinouts
Telco Chrono PRI Module DB15
1 TX Tip ----> 9 TX Tip
2 TX Ring ----> 2 TX Ring
4 RX Tip ----> 8 RX Tip
5 RX Ring ----> 15 RX Ring
I think this would be 120-Ohm balanced connection.
Thanks
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
