Can you guide me how can I configure windows workstation for full duplex and 100mbps
Aftab
Moe Tavakoli wrote:
> The Duplex issue that another person raised should fix
> this for you. Force the port to 100-full and make
> sure the NIC on the other end, is fine with it too.
> You probably have a high CRC error count also.
>
> Good luck.
>
> --- Aftab Rashid <[EMAIL PROTECTED]> wrote:
> > Hi,
> >
> > We are having problems in the performance of the
> > ethernet. We are using
> > Cisco 2924 Switch for our Lan but I have observed
> > that of and on various
> > links goes down and up quiet often. look as follows
> >
> > Mar 4 16:54:31 dialup20 4448: 1w2d: %LINK-3-UPDOWN:
> > Interface
> > FastEthernet0/21,
> > changed state to up
> > Mar 4 16:54:31 dialup20 4449: 1w2d:
> > %LINEPROTO-5-UPDOWN: Line protocol
> > on Inter
> > face FastEthernet0/21, changed state to up
> > Mar 4 16:54:39 dialup20 4450: 1w2d: %LINK-3-UPDOWN:
> > Interface
> > FastEthernet0/21,
> > changed state to down
> > Mar 4 16:54:39 dialup20 4451: 1w2d:
> > %LINEPROTO-5-UPDOWN: Line protocol
> > on Inter
> > face FastEthernet0/21, changed state to down
> > Mar 4 16:55:11 dialup20 4452: 1w2d: %LINK-3-UPDOWN:
> > Interface
> > FastEthernet0/21,
> > changed state to up
> > Mar 4 16:55:11 dialup20 4453: 1w2d:
> > %LINEPROTO-5-UPDOWN: Line protocol
> > on Inter
> > face FastEthernet0/21, changed state to up
> > Mar 4 17:36:17 dialup20 4454: 1w2d:
> > %LINEPROTO-5-UPDOWN: Line protocol
> > on Inter
> > face FastEthernet0/21, changed state to down
> > Mar 4 17:37:08 dialup20 4455: 1w2d: %LINK-3-UPDOWN:
> > Interface
> > FastEthernet0/21,
> > changed state to up
> > Mar 4 17:37:08 dialup20 4456: 1w2d:
> > %LINEPROTO-5-UPDOWN: Line protocol
> > on Inter
> > face FastEthernet0/21, changed state to up
> > Mar 4 18:25:23 dialup20 4457: 1w2d: %LINK-3-UPDOWN:
> > Interface
> > FastEthernet0/23,
> > changed state to up
> > Mar 4 18:25:23 dialup20 4458: 1w2d:
> > %LINEPROTO-5-UPDOWN: Line protocol
> > on Inter
> > face FastEthernet0/23, changed state to up.
> >
> > I have checked the cables they are perfectly
> > alright. I added
> > carrier-delay of 4 sec but got no advantage.
> >
> > What could be the source of the problem and can I
> > solve it.
> >
> > Thanks
> >
> > Aftab Rashid
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
> =====
> _____________________________________________
> Moe Tavakoli
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
