set up a scope for each subnet
add ip helper-address to each VLAN interface on your switch or router
basically the same way you would set it up if you wanted remote sites to
share a DHCP server at one site...
that's it
""Justin Lofton"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> How do you set up one DHCP server when using VLANs? So that each VLAN
gets
> the proper addresses on request.
>
> Justin Lofton
> Account Executive/CCNA
> Tredent Data Systems
> [EMAIL PROTECTED]
> (818) 222-3770
> http://www.tredent.com/
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
