I am trying to setup a 1750 router and am stuck. From the router (
telnet session) I am able to ping cisco.com or its
ip address. When I try to browse the internet or
ping and internet address (cisco.com) it fails. See the attached config.
Please help.
!
version 12.1
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Wethersfield
!
no logging buffered
no logging buffered
logging rate-limit console 10 except errors
enable secret 5 password
enable password 7 password
!
memory-size iomem 15
ip subnet-zero
no ip finger
!
ip audit notify log
ip audit po max-events 100
mgcp modem passthrough voaal2 mode nse
no mgcp timer receive-rtcp
!
interface Ethernet0
ip address dhcp
ip nat outside
no ip mroute-cache
half-duplex
!
interface FastEthernet0
ip address 192.168.1.2 255.255.255.0
ip nat inside
no ip mroute-cache
speed auto
half-duplex
!
ip kerberos source-interface Ethernet0
ip classless
no ip http server
!
line con 0
password 7 password
login
transport input none
line aux 0
password 7 password
login
line vty 0 4
password 7 password
login
!
no scheduler allocate
end
--
Natasha Flazynski
440.949.1399
http://www.ciscobot.com
My Cisco information site.
http://www.botbuilders.com
Artificial Intelligence and Linux development
------------------------------------------------
"Out of Clutter, find Simplicity.
>From Discord, find harmony.
In the middle of difficulty, lies
opportunity."
- Albert Einstein
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]