Could you use a "floating static route"? Configure a static route via the
ISDN connection, however assign this route a higher cost the tha route via
the Frame relay connection.
Clayton Price
""Paco"" <[EMAIL PROTECTED]> wrote in message
987kne$r0o$[EMAIL PROTECTED]">news:987kne$r0o$[EMAIL PROTECTED]...
> Hi all:
>
> I have this problem. My network have a firewall that translate inside IP�s
> and a router Cisco 1720 connect the firewall to Internet, ok. I need to
> implement a backup line, but this line can�t have the same IP address,
then
> i have to do a second NAT in the router, it�s possible? or how can I do a
> backup line that will have another public IP?
>
> Exist any command to detect that the Frame Relay is down and automatically
> open the ISDN connection?
>
>
> Thanks for all.
>
>
> Paco Garcia
> [EMAIL PROTECTED]
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
