Hi Noel
Have you tryed to switch console from the console port on the switch.
This should give you the router console port.
Hope this helps
Dave
"mike moran"
<saxon747474@ho To: [EMAIL PROTECTED]
tmail.com> cc:
Sent by: Subject: unable to session tunnel to a
6500 msfc module on slot 15
nobody@groupstu
dy.com
03/08/2001
13:20
Please respond
to "mike moran"
Hi All,
Anyone ever had this error before:
session: Unable to tunnel to Router-15 (57)
I've a 6500 with a sup1a-2ge with an msfc. Brand new box and confiured the
switch and router. Rebooted the switch and now I can't session into the
msfc
or telnet to the msfc. I can only ping the vlan1 int on the msfc.
thnx's in adv for ur help
rgrds
noel
see below:
sg-6509-2> (enable) telnet 10.44.31.249
Trying 10.44.31.249...
Unable to connect to remote host.
csg-6509-2> (enable) ping 10.44.31.249
10.44.31.249 is alive
csg-6509-2> (enable) ses 15
Trying Router-15...
session: Unable to tunnel to Router-15 (57)
csg-6509-2> (enable)
csg-6509-2> (enable)
csg-6509-2> (enable)
csg-6509-2> (enable)
csg-6509-2> (enable) sh ver
WS-C6509 Software, Version NmpSW: 5.5(6a)
Copyright (c) 1995-2001 by Cisco Systems
NMP S/W compiled on Feb 23 2001, 10:23:18
System Bootstrap Version: 5.3(1)
Hardware Version: 2.0 Model: WS-C6509 Serial #: SCA044403NZ
Mod Port Model Serial # Versions
--- ---- ------------------- -----------
--------------------------------------
1 2 WS-X6K-SUP1A-2GE SAD040304HF Hw : 3.3
Fw : 5.3(1)
Fw1: 5.4(2)
Sw : 5.5(6a)
Sw1: 5.5(6a)
WS-F6K-PFC SAD04270KU4 Hw : 1.1
3 8 WS-X6408A-GBIC SAD04450CAX Hw : 1.3
Fw : 5.4(2)
Sw : 5.5(6a)
4 48 WS-X6348-RJ-45 SAL04483PG0 Hw : 1.4
Fw : 5.4(2)
Sw : 5.5(6a)
5 48 WS-X6348-RJ-45 SAL04483PFV Hw : 1.4
Fw : 5.4(2)
Sw : 5.5(6a)
15 1 WS-F6K-MSFC SAD04240MUZ Hw : 2.0
Fw : 12.1(2)E,
Sw : 12.1(2)E,
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 65408K 37491K 27917K 16384K 13186K 3198K 512K 251K 261K
Uptime is 0 day, 0 hour, 39 minutes
csg-6509-2> (enable)
csg-6509-2> (enable)
csg-6509-2> (enable) sh mod
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC no ok
3 3 8 1000BaseX Ethernet WS-X6408A-GBIC no ok
4 4 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok
5 5 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok
Mod Module-Name Serial-Num
--- ------------------- -----------
1 SAD040304HF
15 SAD04240MUZ
3 SAD04450CAX
4 SAL04483PG0
5 SAL04483PFV
Mod MAC-Address(es) Hw Fw Sw
--- -------------------------------------- ------ ----------
-----------------
1 00-d0-d3-35-6d-4e to 00-d0-d3-35-6d-4f 3.3 5.3(1) 5.5(6a)
00-d0-d3-35-6d-4c to 00-d0-d3-35-6d-4d
00-d0-03-2f-a0-00 to 00-d0-03-2f-a3-ff
15 00-30-7b-97-9d-20 to 00-30-7b-97-9d-5f 2.0 12.1(2)E, 12.1(2)E,
3 00-02-7e-f4-9d-48 to 00-02-7e-f4-9d-4f 1.3 5.4(2) 5.5(6a)
4 00-03-6c-14-d5-d0 to 00-03-6c-14-d5-ff 1.4 5.4(2) 5.5(6a)
5 00-04-28-62-35-20 to 00-04-28-62-35-4f 1.4 5.4(2) 5.5(6a)
Mod Sub-Type Sub-Model Sub-Serial Sub-Hw
--- ----------------------- ------------------- ----------- ------
1 L3 Switching Engine WS-F6K-PFC SAD04270KU4 1.1
csg-6509-2> (enable)
csg-6509-2> (enable)
csg-6509-2> (enable) sh test
Diagnostic mode: minimal (mode at next reset: minimal)
Environmental Status (. = Pass, F = Fail, U = Unknown, N = Not Present)
PS1: F PS2: . PS1 Fan: F PS2 Fan: .
Chassis-Ser-EEPROM: . Fan: .
Clock(A/B): A Clock A: . Clock B: .
VTT1: . VTT2: . VTT3: .
Module 1 : 2-port 1000BaseX Supervisor
Network Management Processor (NMP) Status: (. = Pass, F = Fail, U =
Unknown)
ROM: . Flash-EEPROM: . Ser-EEPROM: . NVRAM: . EOBC Comm: .
Line Card Status for Module 1 : PASS
Port Status :
Ports 1 2
-----------
. .
Line Card Diag Status for Module 1 (. = Pass, F = Fail, N = N/A)
Module 1
Earl V Status :
NewLearnTest: .
IndexLearnTest: .
DontForwardTest: .
DontLearnTest: .
ConditionalLearnTest: .
BadBpduTest: .
TrapTest: .
MatchTest: .
SpanTest: .
CaptureTest: .
ProtocolMatchTest: .
IpHardwareScTest: .
IpxHardwareScTest: .
MultipleRoutersScTest: .
L3DontScTest: .
L3RedirectTest: .
L3Capture2Test: .
L3VlanMetTest: .
AclPermitTest: .
AclDenyTest: .
Loopback Status [Reported by Module 1] :
Ports 1 2
-----------
. .
Channel Status :
Channel Test skipped as Minimal diagnostics selected
InlineRewrite Status :
InlineRewrite Test skipped as Minimal diagnostics selected
csg-6509-2> (enable)
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]