I have setup the RSPAN vlan....as vlan 200.... Thanks, Chris Boyd Network Support 828.323.4103 Alex Lee, Inc. 120 4th St SW Hickory, NC 28602 www.alexlee.com ----- Original Message ----- From: "Udo Konstantin" <[EMAIL PROTECTED]> To: "'Chris Boyd'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Thursday, March 08, 2001 6:23 AM Subject: AW: Rspan > Hi , > > what about the vlan configuration ? > Did you also specify the vlans on the affected router ? > > Udo > > -----Ursprungliche Nachricht----- > Von: Chris Boyd [mailto:[EMAIL PROTECTED]] > Gesendet: Donnerstag, 8. Marz 2001 18:05 > An: [EMAIL PROTECTED] > Betreff: Rspan > > > Hey Guys, > > I need some help configuring RSPAN with my NAM...I have setup my = > destination port on my main 6509 but I want to monitor a segment that is = > about 6 miles away on another 6509....when I try to configure my source = > port I get the following error: > > Corp-Test-6509> (enable) set rspan source 3/1 200 both create > Remote span source(s) not supported > > any ideas and input would be greatly appreciated....I have opened a case = > no answers yet...I have scoured Cisco's website so far no luck...IOS = > version 5.5.6 > > thanks guys > > > Thanks, > > Chris Boyd, CCNA > Network Support > 828.323.4103=20 > Alex Lee, Inc. > 120 4th St SW > Hickory, NC 28602 > www.alexlee.com > > _________________________________ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
