If you use "show controller 'interface' " then you will see the received
clockrate
router#sh cont s2/0
M4T: show controller:
PAS unit 0, subunit 0, f/w version 1-45, rev ID 0x2800001, version 3
idb = 0x61BD7ED0, ds = 0x61BD9970, ssb=0x61BD9C40
Clock mux=0x0, ucmd_ctrl=0xC, port_status=0x73
Serial config=0x8, line config=0x200
maxdgram=1608, bufpool=48Kb, 31 particles
DCD=up DSR=up DTR=up RTS=up CTS=up
line state: up
cable type : V.11 (X.21) DTE cable, received clockrate 1983252
base0 registers=0x3D000000, base1 registers=0x3D002000
mxt_ds=0x627FCA68, rx ring entries=40, tx ring entries=128
rxring=0x3CAB2C0, rxr shadow=0x61BDE0FC, rx_head=5
txring=0x3CAB440, txr shadow=0x61BDE308, tx_head=38, tx_tail=38, tx_count=0
throttled=0, enabled=0
rx_no_eop_err=0, rx_no_stp_err=0, rx_no_eop_stp_err=0
rx_no_buf=0, rx_soft_overrun_err=0, dump_err= 1, bogus=0, mxt_flags=0x0
tx_underrun_err=0, tx_soft_underrun_err=0, tx_limited=1(64)
tx_fullring=3175352, tx_started=2093664508
router#
hope this helps
Dave
"YY"
<nobody@group To: <[EMAIL PROTECTED]>
study.com> cc:
Sent by: Subject: RE: DTE side clock speed
nobody@groups
tudy.com
03/08/2001
11:09
Please
respond to
"YY"
Thank you all very much.
Evan:
I think "show controller " only works for the DCE side.
Brad:
Yes, I'll try your suggestion of checking the CSU setting. But for
back-to-back connection in home lab, is there no way to check clock speed
received on DTE side ?
Thank you.
Regards,
YY
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Evan Francen
Sent: Thursday, March 08, 2001 4:03 AM
To: 'YY'; [EMAIL PROTECTED]
Subject: RE: DTE side clock speed
Show controllers
-----Original Message-----
From: YY [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 07, 2001 8:22 AM
To: [EMAIL PROTECTED]
Subject: DTE side clock speed
For leased line, our router is on DTE side. How to check the clock speed
we
buy from the service provider ?
thanks.
Regards,
YY
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]