ok here is the situation , I have an 804 isdn router in the field that dials into the host router here at the office lets say the 804 in the field is : customer1 its ip address is e0 150.5.56.1 and the bri is 150.5.1.56 . In the host router i have the statements: username customer1 password xxxx and i have an ip route set up like : ip route 150.5.56.0 255.255.255.0 150.5.1.56 ... now here is the wierd part .. under dialer0 i want to add dialer map ip 150.5.1.56 name customer1 , but the router here will not allow it and gives me a message like : %Unable to add map, dynamic map currently exists for ip 150.5.1.56 so just in case i try to remove it and get:%Unable to add map, dynamic map currently exists for ip 150.5.1.56 i have searched the entire config and see no dialer map for 150.5.1.56!!! any clues?? Thanks, Jerry _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
