This should be one of the easiest setups you have ever done. Merely specify
the layer 2 protocol (default is HDLC) and drop in an IP. Make sure you do
the same on the other side of the circuit. You should see that sucker go
UP-UP in a few seconds. Oh, be sure to specify the timeslots on the Kentrox
(or whatever you use for CSU). The BGP will be easy or complicated,
depending on what you are trying to do with it. Good luck.
Joe
----------
>From: Adam Wang <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: setting up DS3 using HSSI
>Date: Wed, Mar 14, 2001, 2:04 PM
>
> Hi group
>
> I'm trying to setup a 7100 with a HSSI card to connect
> to Internet through a DS3. BGP will be the routing
> protocol. Anyone has a sample config that I can use
> as a reference? Any special commands for the HSSI
> interface and DS3?
> Your input will be greatly appreciated.
>
> Adam
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Auctions - Buy the things you want at great prices.
> http://auctions.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
