You'll want to double-check this, but you should be able to issue the
copy commands to get the new image and then specify to erase the
existing flash first. Since the 3640 runs IOS from RAM, you don't have
to worry about the contents of flash memory unless the thing reboots for
some reason.
Like I said, check the docs on CCO first, but I've been through this
process on a 2600 and had no problems.
John
>>> "Roberts, Timothy" <[EMAIL PROTECTED]> 3/16/01 11:07:41
AM >>>
I have a 3640 that I need to load a new image on. I need to delete and
old
image from the internal flash. What commands do I need to use to do
this.
I have issued the delete command and it is now specified as [deleted]
but I
do not have the space available. It appears that there is no squeeze
command available. It is running 12.0.7T.
Would the commands on a 7100 series be the same as the 3640?
Thanks
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
