I have had the same issue with the 3.1 CD One version. I went to a dual PIII, RAID 5 (which helped tremendously) and 1 GB RAM. If you are anywhere near the minimum requirements, then you're going to wait. Some things you could try: download the latest MS VM from the MS site or other such as http://www.download.com , uninstall the CAM if you installed it (per Cisco TAC - they say it really slows down the Java rather than speed it up!), and double check that the virtual memory is really 2 times the amount of physical RAM. Incidentally, the newest version (CD One version 3.2 I think) is supposed to be considerably faster and able to actually run on a server close to the minimum specs. Rik ""Rossetti, Stan"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Anybody have any recommendation for the hardware for a CiscoWork2000 server > (NT). I am currently using a 500MHz processor, 512MB memory and 12 GB > skuzzy drive, but it still takes 5 minutes for the initial load. The NT > statistics show the memory is flat lined at 100% and processor utilization > is about 60%. I have over 2GB of swap space setup. The PC I am currently > using was originally a workstation. > > > > > Thanks > > Stan Rossetti > > > NASA - PriSMS > Advanced Technology Group > Voice: (256) 544-5031 > Email: [EMAIL PROTECTED] > Beeper: 544-1183 pin 0112 > > CCDA, CCNA, CCSE > > _________________________________ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
