Hi,
I have 5 channels connected:
BR1/0:1 Sync PPP - Bundle: Di1
BR1/0:2 Sync PPP - Bundle: Di1
BR1/1:1 Sync PPP - Bundle: Di1
<----- bri1/1:2 is not connected
BR1/3:1 Sync PPP - Bundle: Di1
BR1/3:2 Sync PPP - Bundle: Di1
The Bri1/1:2 is not connected, but the router says
> 00:17:57: BR1/1 DDR: has 2 ongoing call(s), maximum allowed call(s) 2 =
> on
> pool 5, exceeded max
> 00:17:58: BRI1/1: wait for isdn carrier timeout, call id=3D0x803D
> 00:17:58: BR1/1 DDR: Attempting to dial 884400507
> 00:18:04: BRI1/1: wait for isdn carrier timeout, call id=3D0x803E
>
????
regards.
-----Mensaje original-----
De: Tony van Ree [mailto:[EMAIL PROTECTED]]
Enviado el: lunes, 19 de marzo de 2001 22:28
Para: Javier Castillo Alcibar; Cisco Mailing List (E-mail)
Asunto: Re: Dialer problems
Hi,
How many 'B' channels do you have to dial out on. More than two on a BRI.
I don't think so. I would assume then your third call is waiting for a
spare channel. You might need more than one BRI.
Just some thoughts,
Teunis,
Hobart, Tasmania
Australia
On Monday, March 19, 2001 at 06:28:21 PM, Javier Castillo Alcibar wrote:
> Hi there,
>
> I have a problem with my dialer:
>
> 00:17:57: BR1/1 DDR: has 2 ongoing call(s), maximum allowed call(s) 2 =
> on
> pool 5, exceeded max
> 00:17:58: BRI1/1: wait for isdn carrier timeout, call id=3D0x803D
> 00:17:58: BR1/1 DDR: Attempting to dial 884400507
> 00:18:04: BRI1/1: wait for isdn carrier timeout, call id=3D0x803E
>
> interface BRI1/1
> no ip address
> encapsulation ppp
> load-interval 30
> dialer pool-member 5 priority 90 max-link 2
> isdn switch-type basic-net3
> ppp authentication chap callin
>
> interface Dialer1
> ip address 192.168.20.2 255.255.255.0
> encapsulation ppp
> no ip route-cache
> no ip mroute-cache
> load-interval 30
> dialer pool 5
> dialer remote-name pppSERVER
> dialer idle-timeout 18000
> dialer enable-timeout 2
> dialer string 884401044
> dialer string 884401000
> dialer string 884400507
> dialer hold-queue 100
> dialer load-threshold 1 outbound
> dialer max-call 6
> dialer-group 1
> ppp authentication chap callin
> ppp multilink
>
>
> Any ideas? Should I use a "dialer wait-for-carrier"??
>
> Thanks in advance.
>
>
> Javier Castillo Alc=EDbar - [EMAIL PROTECTED]
> Alhambra Systems, S.A. - www.alhsys.com
> c/Albasanz 14, 28037 Madrid
> Tel.: +34 91 787 23 00
> Fax.: +34 91 787 23 01
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
