I assure you Louis, I have searched all appropriate web sites, including the
link you supplied. All are completely useless if your router has NO Flash
memory! The reason's for why the router has no flash memory are quite
inconsequential. But thank you for your assistance!
-Rizzo
-----Original Message-----
From: EA LOUIE [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 20, 2001 4:32 PM
To: Rizzo Damian; [EMAIL PROTECTED]
Subject: Re: [Password recovery]
LOL... learn how to use http://www.cisco.com
my search of "Password Recovery" gave me:
http://www.cisco.com/warp/public/474/index.shtml
I find it hard to believe that your top-of-the-line, expensive 3600 chassis
has no flash memory...you might not have an external PC Card flash, but
there's a flash SIMM inside the chassis, unless someone removed it...and IOS
is not loaded into NVRAM - here's the memory breakdown...
FLASH = IOS image(s)
NVRAM = device configuration information, logging console messages, etc.
DRAM = routing tables, ARP tables, running config, packet buffers, and IOS
at
runtime
hth
-e-
Rizzo Damian <[EMAIL PROTECTED]> wrote:
>
> We have a problem with our 3660 router. We forgot the enable password and
> need to start from scratch and recreate the passwords. The problem is, the
> router has no Flash memory, so the router only boots into Rommon mode...I
> don't believe these routers have bootflash, because you can't use the
"boot
> tftp" command without a BOOTLDR not set error. So even after we manualy
> install the IOS via X-modem and it is run in NVRAM, it loads the startup
> config in memory and that just brings us back to where we were before....A
> router in which we have no enable password for. What are our options at
this
> point? Thank you.
>
>
>
> - Rizzo
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
