Charles Nunie <[EMAIL PROTECTED]> wrote: > Hello, > > Where can I get interpretation on the errors in my log file? Meanwhile can > someone decipher this: Those are all normal first-time startup messages. for their meanings and the meaning of other log messages, see http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12supdoc/12sems/index.htm <giving people fishing poles again> ;-)> > > > 00:00:02: %SYS-7-NV_BLOCK_INIT: Initalized the geometry of nvram > 00:00:13: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down > 00:00:13: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up > 00:00:13: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up > 00:00:13: %SYS-5-CONFIG_I: Configured from memory by console > 00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed > sta > te to up > 00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, > chang > ed state to down > 00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, > change > > Thanks > Dzilo > > > ____________________________________________________________________ > Get free email and a permanent address at http://www.netaddress.com/?N=1 > > _________________________________ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ____________________________________________________________________ Get free email and a permanent address at http://www.netaddress.com/?N=1 _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]