Is there firewall software running?
If so have you rules that are disabling ICMP?
""Brent Ulfig"" <[EMAIL PROTECTED]> wrote in message
99fq63$5no$[EMAIL PROTECTED]">news:99fq63$5no$[EMAIL PROTECTED]...
> I've got an unusual problem with my PIX 515.
>
> I've configured the inside interface correctly, and can ping hosts on the
> internal network. I've configured the outside interface correctly (as far
> as ip addresses go) and can ping anywhere on the internet.
>
> I've configured the router (to the internet) as the default route of the
> pix...and the pix as the default gateway of the hosts on the internal
> network.
>
> I've also used the conduit permit icmp any any
> command so that i can ping in and out of the firewall...
>
> When I try to ping anywhere on the internet from the firewall it
> works...also when i try to ping the internal network it works...
>
> When i try to ping the pix from a host it works...when i try to ping the
> router (to the internet) from a host it works...(meaning it goes through
the
> pix to the router fine)
>
> however, when i try to ping anywhere on the internet (including the next
hop
> from the router) it doesn't work...i can't get passed the router...it just
> dead ends there...
>
> i checked to make sure that the subnet mask on the pix is right...and its
> fine...
>
> any ideas?
>
>
> Thanks,
>
> Brent
> CCNP, CCDA, MCSE, MCP+I, etc.
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
