Show us your configs.
----- Original Message -----
From: Shane Stockman <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, March 27, 2001 7:09 AM
Subject: Router problem
> I have a 1720 with a serial wic at a remote site. I see the interface on
my
> side as up/up but I cannot telnet nor ping the remote site successfully. I
> have had the guy on the remote side check the config line by line and
clear
> ip routes , and it does not show all the routes even though the 1720 is
> using eigrp and has ip classless.He can see his side as up/up as well.
>
> I think it is a hardware or IOS problem.
>
> Any suggestions
>
> Thanks
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
