I configured cisco 2612 with SRT/TLB, users in ethernet domain was able to
communicate with
token ring domain users and vice versa.
If you want to apply transaparent bridge between 2 differnent domain, from
ethernet side,
that should not have any problem, but users in token ring has problem to
communicate
with user in ethernet.
If you are using 2 router, you may need to configure DLSW.
hope this help
Vincent
"Andrew Larkins" <[EMAIL PROTECTED]> ¼¶¼g©ó¶l¥ó
8F5F72F80EF5D311ADE600A0C9DCF8620112C241@UBDCCOMJHBEX">news:8F5F72F80EF5D311ADE600A0C9DCF8620112C241@UBDCCOMJHBEX...
> Does anyone have a sample config for this. I know that I need to specify
> bridge-groups and the relevant bridge protocols. A client is looking at a
> seriously temporary solution. He need Ethernet users and Token rings users
> to connect via bridging. I am trying to set it up in the lab with 2 Cisco
> 2500 routers (2501 and a 2504 connected through a back to back serial
link).
>
> I know that this is not a great way of doing things, but this is lab work.
>
> All help appreciated
>
> Thanks
> Andrew
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
