They do not always need to be fully meshed if you set up route reflectors.
The IBGP "speakers" will pass the information along to the other neighbors.
I almost see it as a DR in OSPF. It will pass all the information of routes
and neighbors along even if there is not a mesh. Sorry if this is not too
detailed, just a rookie in BGP...
*****************************************************************
This has been an Eyez Only streaming e-mail broadcast...We are watching.
NetEyez - CCNP, CCDA
----- Original Message -----
From: "Pickard, Richard" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, March 28, 2001 1:53 PM
Subject: IBGP neighbors
> 3/28/2001 12:55pm Wednesday
> =20
> Would anyone care to elaborate on IBGP neighbors?
> Must they always be fully meshed or do route reflectors negate this?
> =20
> =20
> Richard L. Pickard
> [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> (312) 560-6482
> =20
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
