Contact Teltone. They can send you a manual. The 2503s have S/T ISDN
interfaces. I believe that the 2000 can support both S/T and U interfaces.
Most likely there will be some switch or configuration required to match the
desired interface.
Follow the rest of the chapter in the book and test for layer one and two
connectivity. Troubleshooting is a necessary skill to master. Good luck.
> -----Original Message-----
> From: Hoa Ngo [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, March 28, 2001 8:55 PM
> To: [EMAIL PROTECTED]
> Subject: Need help with ISDN simulator.
>
>
> Hi! Everyone,
> I got the 2 2503 routers and Teltone ILS-2000 ISDN line
> simulator. I try to
> learn the lab # 2 in the book All-in-One CCIE Lab study
> guide. I follow all
> the step in the book but I can not ping from RouterA to
> RouterB. Can you
> show me how to use the simulator?
> TIA
> Howard
> ______________________________________________________________
> ___________
> Get Your Private, Free E-mail from MSN Hotmail at
> http://www.hotmail.com.
>
> _________________________________
>
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
