Hi,
If you configure your router without a threshold statement only one channel will come
up. The channel it choses is dependant on the ISDN switch as I understand it. You
can configure the BRI to place two separate calls.
Teunis
Hobart, Tasmania
Australia
On Thursday, March 29, 2001 at 03:17:23 PM, Ash Aslam wrote:
> Hi Group!!
>
> I would like to know if it's possible to separate the two ISDN B Channels so
> that one remains active whilst the other one is free. I have checked on the
> Cisco web site and Cisco press books but could not find anything on how to
> configure the BRI Channels separately.
>
> Can someone pls shed some light by providing a small config or point me in
> the right direction.
>
> Thanks & kind Regards,
> Ash
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
