or just use one of the three you have as the frame switch....grab
the white paper on ccprep.com that talks about a CCIE home
lab....it will sorta walk you through working with frame relay,etc...
Pedro Quezada <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> u can connect with back to back cables ....but better yet
> get arouter with four serial interfaces and configure it as a frame relay
switch
>
> Luke Everett wrote:
>
> > I have 3 Cisco 2500 routers that I want to setup to simulate WAN =
> > connections. What can I do to simulate this with my wan cables without
=
> > having to buy a CSU/DSU? Thanks.
> >
> > Luke Everett
> > MCP+I,MCSE,CCNA
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
