just download hyperterminal private edition, upgrade to the included
hyperterminal www.hilgraeve.com
Neil Schneider
<[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> If you are running winnt, they're is a known bug.
> Hyperterminal implementation on winnt doesn't perform break
> sequence properly with cisco. Not sure if its a cisco bug
> or a hyperterm bug. I just know it doesn't work. Anyhow
> download another terminal emulator - Tera term is my
> personal recommendation. Cisco also has a junky term
> emulator that solves this issue.
>
>
> "Ruihai An" <[EMAIL PROTECTED]> wrote:
>
> >I had problem to Break from my laptop, but fine when I
> tried to do it from
> >another desktop.
> >You can also lower the baud to 1200 and hold the space key
> while booting the
> >router.
> >
> >Ruihai
> >
> >
> >"Omer Ehsan Dar" <[EMAIL PROTECTED]> wrote in message
> >[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> >> Hi all,
> >> I have a 2503 router with 12.0 IOS. it does not obey the
> password
> >> recovery command the break command does not work if you
> hit it during
> >> bootup. Any suggestions.
> >> Thanks
> [EMAIL PROTECTED]
> >
> >
>
>
> --------------------------------------------------------------------------
>
> Get the full scoop on your favorite car, truck or SUV.
> Check out the nice rides on CollegeClub.com
> http://www.collegeclub.com/channels/autoguide
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
