The problem I have run into in the past in a multi vendor setup is the
following:
Make sure you know what the elements are in the ISAKMP and IPSEC portion of
the setup. IsaKMP: Group, Hash and Encryption. IPSEC: ESP, AH and all
the possible combinations (in Cisco 1 AH and up 2 ESP with only 1 des/3des
ESP statement.)
Also know what the defaults are (for ISAKMP in Cisco it's Group 1 and Hash
MD5) Sometimes you forget the defaults just because they don;t show up in
run-conf.
Also in the cry map in Cisco there is a hmac switch at the end (specially
the commonly used esp-md5-hmac) which other vendors don;t list the hmac
portion..
Thats all I can think of.
Moe.
-----Original Message-----
From: Sajid Karim [mailto:[EMAIL PROTECTED]]
Sent: Monday, April 02, 2001 10:42 AM
To: [EMAIL PROTECTED]
Subject: PIX and Raptor
All:
Looking for any caveats in establishing VPN tunneling between PIX and
Raptor firewall?
Any implementation tips using IPSEC or other features.
Thanks.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]