Check access-list 10. Make sure your PC is contained within it.
or do:
conf t
line vty 0 4.
no access-class 10 in
Regards,
Gareth
"Kim Quang Vo" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> line aux 0
> no exec
> transport input telnet
> Upgrading to IOS 12.1.5C E8 on 7206
>
> I got these in under line vty
> transport input lat pad v120 mop telnet rlogin udptn nasi
> then I could not run telnet to router.
>
>
> transport output none
> line vty 0 4
> access-class 10 in
> exec-timeout 60 0
> password 7 xxxxxxxxxxx
> login
> transport input lat pad v120 mop telnet rlogin udptn nasi
> line vty 5 15
> password 7 xxxxxxxxxxx
> login
> transport input lat pad v120 mop telnet rlogin udptn nasi
>
>
> Any hints will be appreciated
>
>
> Kim
>
>
>
>
>
>
>
>
****************************************************************************
*
> *
> Kim Quang Vo - ElTele Xst
> Fredrik Selmersvei 2, N-0603 Oslo.
> phone.+47 23 18 12 08 mobile .93081208 fax. 47 23181961
>
****************************************************************************
*
> *
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
