Yes, you can get MM fiber to work with the LX interfaces. To do so requires
a mode conditioning patch cable. Basically it is a fiber patch that is
single mode on the transmit and multimode on the receive. The single mode
is spliced into a multimode strand after about 6 to 12 inches. This is
standard in the gigabit arena. Here is a URL.
http://www.cisco.com/univercd/cc/td/doc/product/core/7202/fru/10901gbc.htm
--
Eric Fairfield
CCIE #6413
"Mohamed Heeba" <[EMAIL PROTECTED]> wrote in message
91B200CBBEC3D111992A00805F31E6CB880880@MINAMAIL">news:91B200CBBEC3D111992A00805F31E6CB880880@MINAMAIL...
> hi guys
> anyone know if the LX modules can run over MM fiber ?
> where can i get the distance limitation for this
>
>
> thx
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
