Dear all,

I have an old 7507 and would like to upgrade the boot image and IOS to
12.0.x....... can someone suggests:
1. The most reliable IOS version in 12.0.x?
2. I would most like to take away my ethernet and channelized T1 module.
(therefore, I have AIP, RSP2(64M ram), VIP+PA-FE-TX x 2, and SSIP8.



Please see my sh ver below:


Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-AJSV-M), Version 11.2(18)BC, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 15-Apr-99 06:59 by krunyan
Image text-base: 0x600108A0, data-base: 0x60C3A000

ROM: System Bootstrap, Version 11.1(2) [nitin 2], RELEASE SOFTWARE (fc1)
BOOTFLASH: GS Software (RSP-BOOT-M), Version 11.1(6), RELEASE SOFTWARE (fc1)

7057old uptime is 7 weeks, 3 days, 3 hours, 28 minutes
System restarted by reload at 08:04:18 HKT Fri Feb 16 2001
System image file is "slot0:rsp-ajsv-mz_112-18_BC.bin", booted via slot0

cisco RSP2 (R4600) processor with 65536K bytes of memory.
R4600 processor, Implementation 32, Revision 2.0
Last reset from power-on
G.703/E1 software, Version 1.0.
SuperLAT software copyright 1990 by Meridian Technology Corp).
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
TN3270 Emulation software.
Primary Rate ISDN software, Version 1.0.
Chassis Interface.
1 SSIP controller (8 Serial).
1 AIP controller (1 ATM).
1 MIP controller (2 T1).
2 VIP2 controllers (2 FastEthernet)(8 Ethernet).
8 Ethernet/IEEE 802.3 interface(s)
2 FastEthernet/IEEE 802.3 interface(s)
39 Serial network interface(s)
1 ATM network interface(s)
2 Channelized T1/PRI port(s)
123K bytes of non-volatile configuration memory.

20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
8192K bytes of Flash internal SIMM (Sector size 256K).
No slave installed in slot 3.
Configuration register is 0x2102


Thanks a lot.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to