For me, I use the access server for dial in and I define it to get IP from
the DHCP server so the default gateway is automatically assigned by DHCP
server as well.
add this line....
ip dhcp-server <ip of DHCP server>
Tong
-----Original Message-----
From: leo [mailto:[EMAIL PROTECTED]]
Sent: Monday, April 09, 2001 3:16 PM
To: [EMAIL PROTECTED]
Subject: how can the router tell the dialer-in pc what is the gateway
PSTN DDN(PPP)
PCs-----------Router1-------------Router2|
|------network A (188.205.0.0)
|
the ip address of the router1's ethernet is 1.2.3.4,the pc connecting the
router1 via hub can acess network A,
the PCs use PSTN dialer in the router1's a/s,and get an ip address which is
in the router1's address pool,in router1,i use async-bootp gateway
1.2.3.4,but after the pc dialer in the router,I use the command "winipcfg"
in win98,it tells me that its gateway is the ip address of itself!so the
dialer-in pc can't access network A
Could someone tell me how can the pc access network A (except in the pc,use
"route add default 1.2.3.4)?
==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
de afzender direct te informeren door het bericht te retourneren.
==================================================================
The information contained in this message may be confidential
and is intended to be exclusively for the addressee. Should you
receive this message unintentionally, please do not use the contents
herein and notify the sender immediately by return e-mail.
==================================================================
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
