On a 2500, you will have to boot from TFTP or some other method. After you
boot via TFTP you should be able to go in and erase the second flash and
then do a "partition flash 1 16". Then you should be able to TFTP the new
code on just as if you were doing it on the single 8meg flash.
Tim
----- Original Message -----
From: "Circusnuts" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; "Fred Danson" <[EMAIL PROTECTED]>
Sent: Sunday, April 08, 2001 10:24 PM
Subject: Re: 2 8mb flash partitions
I believe the actual command is #no partition FLASH
----- Original Message -----
From: "Fred Danson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, April 09, 2001 3:51 AM
Subject: 2 8mb flash partitions
> Hey Group,
>
> I noticed that one of my 2500 routers which has a total of 16mb of flash
on
> 2 SIMMs has the flash split up into 2 partitions. If I wanted to put an
IOS
> on the router which was larger than 8mb, would it work? Is it possible to
> span a file over multiple flash SIMMs?
>
> Thanks in advance,
> Fred
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
