Under the group async, add the dialer idle-timeout command(in seconds). The
example below gives you 15 minutes of inactivity before it will drop the
connection.
dialer idle-timeout 900
If you want an absolute timeout you must use the timeout absolute command
(in seconds). The example below will give the user 12 hours of use and then
will drop the connection even if they are still passing traffic.
timeout absolute 720 0
Hope this helps.
Scott Ladd
----- Original Message -----
From: "Paul Borghese"
To:
Sent: Tuesday, April 10, 2001 9:48 AM
Subject: Inactivity Timeouts with dialup connections [7:56]
> Does anyone know how to disconnect a person who has been idle (let's say
15
> minutes) on a PPP dialup connection.
>
> Paul Borghese
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=83&t=56
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
