You ATM is running off of a Singlemode SONET interface & there is a far end
RX failure. I'd start with the sending device, be it Telco or local
equipment.
Phil
----- Original Message -----
From: John P Smith
To:
Sent: Tuesday, April 10, 2001 2:01 AM
Subject: ATM OC3 [7:27]
> Does anybody have an expanation about the following show controllers atm
> output
>
> >Framer Information:
> > Framing mode: SONET OC3 STM-1
> >Facility alarm: PathFarEndRxFailure
>
> How do I find out what this alarm means
>
>
> John
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=103&t=27
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]