The ATM OC-3 MultiMode interfaces on routers with which I am familiar are
MultiMode SONET. So my guess is that the LS1010 was just going from MM to
SingleMode.
> -----Original Message-----
> From: Circusnuts [mailto:[EMAIL PROTECTED]]
> Sent: Friday, April 13, 2001 12:18 AM
> To: [EMAIL PROTECTED]
> Subject: LA1010 ATM/ SONET Interfaces [7:454]
>
>
> Hey all- I never focused on this much @ the time, but @ my
> old job (week or
> so
> ago :-) we had quite a few LS1010's running with single mode
> OC3 & OC12, to
> form a meshed backbone. I'm almost positive the LS1010 was
> converting ATM
> (multimode interfaces) on the customer's side, & sending it
> out carrier
> SONET.
>
> Could I be right here ???
>
> Thanks
> Phil
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=512&t=454
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
