Sho Diag gives you all the card information, just like Sho Interface would
for each individual port. I believe you can even get the serial #'s of the
cards as well.
Good Luck !!!
Phil
----- Original Message -----
From: Watson, Rick, CTR, OUSDC
To:
Sent: Friday, April 13, 2001 1:04 PM
Subject: RE: Trying to get interface information on 7000 [7:489]
> Thanks to all...looks like the 'sh diagbus' is the command I was looking
> for...!!
>
> -----Original Message-----
> From: Barnhill, Don [mailto:[EMAIL PROTECTED]]
> Sent: Friday, April 13, 2001 11:48 AM
> To: 'Watson, Rick, CTR, OUSDC'; [EMAIL PROTECTED]
> Subject: RE: Trying to get interface information on 7000 [7:489]
>
>
> Rick,
>
> I think I found what your looking for....try 'show diagbus'. It has the
> part numbers and serial numbers.
> If you do a 'show controller cbus' that will give you hardware and
microcode
> versions.
>
> Don
>
> -----Original Message-----
> From: Watson, Rick, CTR, OUSDC [mailto:[EMAIL PROTECTED]]
> Sent: Friday, April 13, 2001 10:25 AM
> To: [EMAIL PROTECTED]
> Subject: Trying to get interface information on 7000 [7:489]
>
>
> I am trying to get information on some interface cards (i.e. serial
number,
> model number, etc.) on a 7000 running 11.2(14). Something similar to the
'sh
> mod' command on the Catalyst series switches....can ya help me out...?
> Thanks...!!
>
> Rick Watson
> Network Engineer
> OUSD(Comptroller)
> 703.697.5710
> [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=520&t=489
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
