hello,
i am new to access server configuration and am trying to configure one
modular access server(16 internal modems) - CISCO 2611 Version 11.3(2)XA4
i am using this configuration:
=====================================================================
Current configuration:
!
! Last configuration change at 13:35:22 CAT Sat Apr 14 2001 by toor
! NVRAM config last updated at 12:39:21 CAT Sat Apr 14 2001 by toor
!
version 12.0
service timestamps debug uptime
service timestamps log datetime localtime
service password-encryption
!
hostname dialers
!
logging buffered 8192 debugging
logging console notifications
aaa new-model
aaa authentication username-prompt "login: "
aaa authentication login default local
enable secret 5 $1$/DyD$PMk.BhS/LTsGe.v1gslxs.
enable password 7 0101090B4F
!
username mike password 7 082C45450C
username toor password 7 071B2E435C
memory-size iomem 10
ip subnet-zero
ip domain-name a_domain-name
ip name-server 216.y.z
ip name-server 216.x.y.z
async-bootp dns-server 216.x.y.z 216.x.y.z
async-bootp nbns-server 192.168.2.16
clock timezone CAT 2
!
!
!
interface Ethernet0/0
description CORE NETWK
ip address 216.x.y.z 255.255.255.192
ip directed-broadcast
!
interface Ethernet0/1
no ip address
no ip directed-broadcast
no ip mroute-cache
shutdown
!
interface Group-Async1
description 16 INTERNAL DIALUP MODEMS
bandwidth 33
ip unnumbered Ethernet0/0
no ip directed-broadcast
encapsulation ppp
ip tcp header-compression passive
async mode interactive
peer default ip address pool 16DIALERS
no cdp enable
ppp authentication chap
group-range 33 48
hold-queue 10 in
!
autonomous-system 10
!
router ospf 10
redistribute connected metric 90 subnets
redistribute static metric 90
network 216.x.y.0 0.0.0.255 area 0
!
ip local pool 16DIALERS 216.x.y.z 216.x.y.z+16
ip classless
ip route 0.0.0.0 0.0.0.0 216.x.y.1 200
ip route 0.0.0.0 0.0.0.0 216.x.y.6 250
!
logging trap notifications
logging facility local0
logging 216.147.148.11
access-list 51 deny any
access-list 59 permit 216.x.y.z
access-list 61 permit 216.x.y.0 0.0.0.255
access-list 62 permit 216.x.y.z
access-list 62 permit 216.x.y.z
access-list 62 permit 216.x.y.z
access-list 62 permit 216.x.y.z
access-list 62 permit 216.x.y.z
access-list 180 permit ip 216.x.y.0 0.0.3.255 any
access-list 180 deny ip any any log
snmp-server community public RO 62
snmp-server packetsize 2048
snmp-server location "Computer Centre, Nat. Univ of Rwanda, Butare"
snmp-server contact "Computer Center [EMAIL PROTECTED]"
!
line con 0
access-class 62 in
exec-timeout 5 0
password 7 00101C0916
transport input none
escape-character NONE
line 33 48
session-timeout 120 output
location INTERNAL MODEMS
access-class 62 in
exec-timeout 0 0
autoselect during-login
autoselect ppp
modem answer-timeout 60
modem InOut
no history
transport input all
escape-character NONE
stopbits 1
flowcontrol hardware
line aux 0
logging facility local0
logging 216.x.y.z
access-list 51 deny any
access-list 59 permit 216.x.y.z
access-list 61 permit 216.x.y.0 0.0.0.255
access-list 62 permit 216.x.y.x
access-list 180 deny ip any any log
snmp-server community public RO 62
snmp-server packetsize 2048
snmp-server location "Computer Centre, Nat. Univ of Rwanda, Butare"
snmp-server contact "Computer Center [EMAIL PROTECTED]"
!
line con 0
access-class 62 in
exec-timeout 5 0
password 7 00101C0916
transport input none
escape-character NONE
line 33 48
session-timeout 120 output
location INTERNAL MODEMS
access-class 62 in
exec-timeout 0 0
autoselect during-login
autoselect ppp
modem answer-timeout 60
modem InOut
no history
transport input all
escape-character NONE
stopbits 1
flowcontrol hardware
line aux 0
line vty 0 4
access-class 62 in
exec-timeout 0 0
password 7 01050F164F1E0703
length 56
!
ntp clock-period 17180017
ntp server 128.59.35.142
dialers#
=============================================
NOTE: ip addresses have been altered purposely by me. i hope it doesn't
matter.
===============================================
here is the output of
terminal monitor
and debug mdem
==================================
dialers#
2d09h: AAA: parse name=tty33 idb type=10 tty=33
2d09h: AAA: name=tty33 flags=0x11 type=4 shelf=0 slot=0 adapter=0 port=33
channel=0
2d09h: AAA/AUTHEN: create_user (0x80B109C0) user='' ruser='' port='tty33'
rem_addr='async' authen_type=ASCII service=LOGIN priv=1
2d09h: AAA/AUTHEN/START (2680348008): port='tty33' list='' action=LOGIN
service=LOGIN
2d09h: AAA/AUTHEN/START (2680348008): using "default" list
2d09h: AAA/AUTHEN/START (2680348008): Method=LOCAL
2d09h: AAA/AUTHEN (2680348008): status = GETUSER
2d09h: AAA/AUTHEN/ABORT: (2680348008) because Autoselected.
2d09h: AAA/AUTHEN: free_user (0x80B109C0) user='' ruser='' port='tty33'
rem_addr='async' authen_type=ASCII service=LOGIN priv=1
.Apr 14 13:21:04: %LINK-3-UPDOWN: Interface Async33, changed state to up
Apr 14 13:21:28: %LINK-5-CHANGED: Interface Async33, changed state to
reset
Apr 14 13:21:33: %LINK-3-UPDOWN: Interface Async33, changed state to down
dialers#
=========================================
can somebody help me figure out what is wrong or indicate appropriate
documentation on AAA that can help me ?
many thanx in advance
Email:[EMAIL PROTECTED]
=================================================
PREDICTION IS HARD , ESPECIALLY THE FUTURE
&&&&&&&NIELS BOHR&&&&&&
IL EST DIFFICILE DE PREDIRE , SURTOUT L'AVENIR
own translation :)
=================================================
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=613&t=613
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
