For a small fee, I can use NetFormX to run a couple of sample configurations
for you.
OR
You can check out
http://www.cisco.com/pcgi-bin/front.x/newConfig/config_root.pl
as a learning experience.
Chuck
Thinking may 3640 is overkill for a single frame connection, and that a 2610
might be more cost effective. Wait - Cisco stock way down - maybe you should
be using 7206's at the spoke locations ;->
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
frank
Sent: Monday, April 16, 2001 10:22 PM
To: [EMAIL PROTECTED]
Subject: Choose which module 0n 7507? [7:875]
The 7507 at net center will be connected with 8 3640 at different areas by
FR.
I got puzzled to choose modules.On 7507,among PA-H ,PA-MC-8E1/120,PA-8T-V35
8-Port Serial, V.35 Port Adapter,which one should i choose.Each area should
have its own 2M to the 7507.
On 3640 ,i want to use WIC-1T.
Any help would be greatly appreciated.
Frank
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=879&t=875
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
