I would increase the delay on the R1 to R3 link to a suitable value that
will make the longer route preferred over the short path. If you change
the bandwidth it could affect other processes on the router.
At 10:21 PM 4/17/01, you wrote:
>Hi all,
>
>My network is running EIGRP routing protocol. I want to force the routing
>path so that the routing will not go through the shortest path (e.g. force
>the route from "R1" to "R3" which must go through "R2" and "R4"). What is
>the proper way to do so? Should I change the parameter "BANDWIDTH", "DELAY"
>or others?
>
>
>R1 ----10---- R2
>| |
>| |
>10 10
>| |
>R3 ----10---- R4
>
>
>Thanks.
>dovelet
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1051&t=1048
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
