_c/scprt2/sctacac.htm#xtocid2173216
watch the wrap!
Enable TACACS to Use a Specific IP Address
You can designate a fixed source IP address for all outgoing TACACS packets.
The feature enables TACACS to use the IP address of a specified interface
for all outgoing TACACS packets. This is especially useful if the router has
many interfaces, and you want to make sure that all TACACS packets from a
particular router have the same IP address.
Command: ip tacacs source-interface subinterface-name
-----Original Message-----
From: Ken Yeo [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, April 18, 2001 1:10 PM
To: [EMAIL PROTECTED]
Subject: CiscoSecure ACS [7:1125]
Anyone has experience with CiscoSecure ACS?
I have a question:
Under Network Configuration/Network Access Server Ip address, which
internet's ip address you use for the field? I tried loopback, and all
physical interfaces. Only the interface sending packet back to ACS server
work.
There must be a better way, if not there will be no redundancy, what if the
link goes down?
Please advice,
Thanks,
Ken
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1131&t=1125
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]