Will you need to run BGP? :-) Just kidding... Seriously, what kind of configuration are you talking about? Do you want to connect a modem to the AUX port that will dial out to your ISP? Do you want it to be able to pass through DHCP-assigned addresses to a PC? Is this for a single PC or do you have multiple users? Do you need NAT/PAT? We need more information before we can give you an intelligent answer. Regards, John >>> "Chuck Larrieu" 4/18/01 3:42:48 PM >>> Is this a trick question? Just wondering..... -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Josi Miguel Pirez P. Sent: Wednesday, April 18, 2001 2:24 PM To: [EMAIL PROTECTED] Subject: Help , help I need Connect 1750 router to isp!!!!!!! [7:1142] Hello , boys I need connect router 1750 to the internet by AUX port , please send me example configuration!!!! Thank Josi Miguel Pirez P. ____________________________ Network Engineer, CCNA, MCP. FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=1146&t=1146 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]