In the lab an outboard router will handle the VLAN routing. I don't think
you
need it.
Darren
At 05:15 PM 04/19/2001 -0400, Lupi, Guy wrote:
>I asked this question before, and someone sent some helpful info, but I am
>looking for something more specific. I know the 5000 series is the switch
>used in the lab, but is the focus more on layer 2 or layer 3? I am going to
>get a 5000 series switch but I wanted to know if I should save myself the
>cost of the RSM, or if I absolutely need it. Any help would be appreciated.
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Darren S. Crawford
Lucent Technologies Worldwide Services
2377 Gold Meadow Way Phone: (916) 859-5200 x310
Suite 230 Fax: (916) 859-5201
Sacramento, CA 95670 Pager: (800) 467-1467
Email: [EMAIL PROTECTED] Epager: [EMAIL PROTECTED]
http://www.lucent.com Network Systems
Consultant - CCNA
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1312&t=1296
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
