Hello,
It sounds like you will be dealing with a regular 6500 with either a Sup1
or Sup2 that runs the usual CatOS like the Cat5k so nothing new there,
then you will get to deal with the MSFC daughter card that sits on the
Supervisor module. The MSFC does the Layer 3 stuff and that runs your
standard IOS, like the RSM for the Cat5k's. To get into the MSFC(the
router part) from the CatOS just type "session 15"(if the supervisor is in
the first slot)"session 16"(if the supervisor is in the second slot) and
off you go...
-Daniel-
On Fri, 20 Apr 2001, EA Louie wrote:
> I just got wind of a possible assignment on a project using 6500's. Will
my
> experience with the Cat5k/5500 and IOS get me by with this?
>
> If not, are there any specific 'gotchas' when working with this switch?
>
> Is it a 'standard IOS' switch, or does it operate similar to the Cat5k
> (different CLI for the switch vs. the RSM/LS-1010)?
>
> thanks, all
>
> -e-
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1401&t=1398
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
