How did you get this to work on the AUX port?
I agree with everything bellow except with the
"speed 115200".
Acording to my documentation "Cisco IOS Dial
Solutions" the max speed on the AUX port is
38400.
I have set this up on 2500s, 4500s & 7500s.
Every time that I have tried to force the speed
greater than 38400, the line speed will cycle
through all the speeds 9600, 14400 etc.... and
not sync with the modem.
Is the AUX differnet for 2600's ?
If you repeatedly do a "sh line" what speed does
the AUX show up at? And, is it changing?
PS: I have been checking CCO for the specifics
on the 2600 AUX to confirm but no luck @tt....
DaveC
Bernardo Estevez wrote:
>
> Hey listen man.
> Thank you so much.
> The configuration below WORKED!!!
>
> I appreciate your help.
>
> Thanks again,
> -Bernardo
>
> --- Thomas wrote:
> > Try this configuration:
> >
> > line aux 0
> > login local
> > modem InOut
> > modem autoconfigure type usr_courier
> > transport input all
> > escape-character BREAK
> > autoselect ppp
> > stopbits 1
> > speed 115200
> > flowcontrol hardware
> >
> > I tried the "modem autoconfiguration discoverty"
> > with the U.S. Robotics, but
> > it didn't work. Also, the "modem" adapter shipped
> > with the 2600 router is
> > not the correct one. I don't have the part number
> > here. Please go to Cisco
> > web site and check for part number of this adapter.
> >
> >
> >
> > ""Bernardo Estevez"" wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Hi all,
> > >
> > > I'm trying to configure the AUX port on a Cisco
> > > terminal server 2621. I'm using an external US
> > > Robotics 56K modem connected with a rolled cable
> > and a
> > > modem adapter on the modem side. This connection
> > seems
> > > to work but where I'm having problem is in the
> > > configuration of the "line aux 0" interface.
> > > This is what I have done so far:
> > >
> > > line aux 0
> > > autobaud
> > > modem answer-timeout 20
> > > modem autoconfigure discovery
> > > stopbits 1
> > >
> > > When I dial-in using Windows2k HyperTerminal, the
> > > modem answers and I get connected, but then I
> > don't
> > > see anything on the window. I've tried playing
> > around
> > > with the 'login' and 'password' option but no
> > luck. Do
> > > I have to manually tell it the transmit and
> > receive
> > > speeds? What else am I missing?
> > >
> > > Any input would be greately appreciated.
> > >
> > > Thank you in advance.
> > >
> > > Please also copy your reply to
> > [EMAIL PROTECTED]
> > > as I don't get the chance to go through this list
> > too
> > > often.
> > >
> > > -Bernardo
> > >
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Yahoo! Auctions - buy the things you want at great
> > prices
> > > http://auctions.yahoo.com/
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to
> > [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Auctions - buy the things you want at great prices
> http://auctions.yahoo.com/
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1417&t=1304
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
